LGD 4033 Half Life

LGD 4033 half life is anywhere between 24 to 36 hours. Based on this information you can determine how fast this product works, how to use it correctly, how fast it flushes out of your system, and much more valuable information. In fact, if you’re searching for information regarding Ligandrol – LGD 4033 half life, then this is what you’re likely searching for. My presumption – you need to know when to take LGD 4033.

Let’s get started.

What Means Half Life?

Half-life means the amount of time it takes for half of the compound’s dosage to break down within the body. This means that if you take 5 mg of LGD 4033 and the LGD 4033 half life is between 24 to 36 hours, then in 24 to 36 hours, only 2.5 mg of it will be left in the system (unless you take more of it again). In the following 24 to 36 hours you’ll be left with 1.25 mg of it in the system (unless you take more). It is considered that the compound is completely out of the system after 3-6 half lives. At least, the amount of it is going to be so small that it cannot be detectable.

But after 1-3 half lives, too much of the compound is broken down and flushed out of the system to make a difference. That’s why it is so important to check the half life of a compound before you actually use it. You will have an idea of how to use it correctly in order to use the compound correctly.

Explaining Ligandrol LGD 4033 Half Life

Based on the information shared above, it is crucial for you to take LGD 4033 at least once a day in order to keep stable levels of Ligandrol in the system. If you’re not, you risk dropping the LGD-4033 levels below the optimal levels. But the LGD 4033 half life of 24-36 hours also means that it is sufficient to use Ligandrol only once a day during your Ligandrol cycle. While you can split the total daily dosage into AM and PM administration (such as every 12 hours), this administration schedule will likely provide no further stability in blood pressure and, therefore, no further benefits.

There are various studies confirming that the half-life of Ligandrol is no less than 24 hours and maybe even more than that. So, once a day (every 24 hours) administration will provide optimal levels of this SARM in the body, leading to the best results.

Yet, even if you miss a dosage, just take it as soon as you remember about it. If you’re closer to the next administration, just skip it, take the normal dosage the next day, and continue with your cycle as usual. You should NOT take double doses to make up for the missed dosage. This will lead to overdose, leading to increased risks of side effects.

Best Time To Take Ligandrol

So, you know that you should use Ligandrol (LGD 4033) once a day. But when exactly? You can take Ligandrol either in the morning or in the evening, it doesn’t really matter. What matters the most is to take it approximately one hour before training. The reason is very simple. While LGD 4033 half life is about 24 hours, it achieves peak levels after approximately one hour after ingestion. This means that after one hour, you’ll get most Ligandrol levels in your system, and then it gradually starts to fall down.

For example, after about 6 hours after ingestion, you’ll have approximately 10% less Ligandrol in your system. This means that you can take LGD 4033 both in the morning or at night (it doesn’t affect your sleep), just take it before your training.

Other Important Factors Regarding LGD 4033 Half Life

It is important to understand that this compound will quickly kick into your system. This means that it is likely you’re going to feel it working soon after using it. Some people suggest that they feel it from the first administration. Others suggest it takes a few days. In whichever case, it shouldn’t take more than a week.

Another important thing to take into consideration – it flushes out in a few days. Remember that Ligandrol LGD-4033 is a suppressive SARM (pretty much like any other). In fact, it is more suppressive than numerous others. This means that you should prepare a PCT plan. But PCT starts when all suppressive compounds are out of your system. This means you should wait a couple of days before you start the PCT after the last dosage of Ligandrol. This is the time required for LGD 4033 to flush out of your system and start PCT.

Another important thing is: detection time does not equal half life. The half-life of Ligandrol is only 24-36 hours, but the detection time is much longer than that. This means that if you’re about to be tested for anti-doping, you should wait significantly longer after the last dosage in order to make sure that it is not going to be detected. According to some studies, it takes about 22 days after the last dosage for it to be untraceable on anti-doping tests. I would give it a month, just to be safe. And yes, be sure you will fail it if you take Ligandrol because it is a SARM found on the list of prohibited substances, because of the obvious advantage it gives in sports.

Facts to consider before you use Ligandrol

Use it correctly

If you’re not going to use LGD 4033 correctly, you will not yield all those awesome results and benefits. While this SARM comes with awesome benefits, you need to learn how to use it correctly in terms of dosage, cycle length, when to use it (I explained it earlier), PCT, and so on. Moreover, pretty much like any other PED out there, it only enhances the effects of working out and dieting. If you do not have a proper diet and workout plan, you just can’t expect any benefits.

You won’t get shredded/jacked after just one cycle

You might have heard that Ligandrol (LGD-4033) does an awesome job of burning fat and boosting muscle gaining processes. Indeed, this SARM is awesome, allowing you to gain much more and much faster, making you stronger, and burning fat in the meantime. Nevertheless, even if you work hard and diet right, you just won’t get shredded and/or jacked in just one cycle. No compounds out there (not even anabolic steroids) will do it in just one cycle. It takes years of training and having a diet on point that will get you there. LGD 4033 will just speed up the process, but not in a single cycle.

Larger doses will likely cause more side effects

You may know that larger doses will speed up the muscle building process which is true. But larger doses will also lead to higher risks of side effects. You may be tempted to jumpstart with larger doses so you could see faster/better/more results, but you are likely to see just nastier side effects. Better start slowly, and only if you actually need larger doses, you may start increasing gradually. Studies suggest that Ligandrol is effective in dosages as small as just 1 mg per day! Don’t rush things.

Expect suppression to occur and be prepared for it

Ligandrol (LGD-4033) is a powerful SARM. Being this powerful, it provides powerful benefits, but it is also likely to provide powerful side effects. Among them, I can mention the suppression part of SARMs, which is likely to be higher with LGD4033 because of its potency. For this reason, you should be prepared for the suppression and prepare a PCT for SARMs. You’re going to feel that you stopped LGD4033 after you do, but without a PCT, you’re only going to make it way worse than it has to be.


In the end, LGD 4033 half-life is 24 to 36 hours according to most studies. This means that once-a-day administration is enough to see stable blood levels. You don’t need to use it multiple times a day, although you can still do it if you want to be absolutely sure you won’t have any highs and lows. On the other hand, you need to use it daily, otherwise, fluctuations will surely occur.

Furthermore, please remember that you need to have a proper exercise routine with a good diet in order to use Ligandrol. There’s just no point in using this compound as long as you’re not working out and dieting. Moreover, it is important to dose it correctly and use it correctly in order to yield the best results and stay away from side effects. Nothing will work on its own without proper training and nutrition.

One last thing to mention – you must buy quality Ligandrol. Buy LGD 4033 online for sale directly from SARMS.to if you want to ensure you only get the best quality SARMs. Unfortunately, a lot of sources offer lower quality stuff, which will influence the way the compound affects you. In a negative way. Moreover, you’re going to find a lot of valuable information regarding how to use the compound in the best possible way so you can yield the best possible results.



Leave a Reply

Your email address will not be published. Required fields are marked *

You were not leaving your cart just like that, right?

Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)