If you’re searching for the best LGD 4033 Dosage then this article is for you. We’re going to talk about the best Ligandrol dosage both for cutting and for cutting needs. Moreover, it would be an even more helpful article if you’re a beginner because I’m also going to go over the best LGD 4033 (Ligandrol) dosage for beginners.
In short, here you’ll find lots of information about the best LGD 4033 dosage for different people, different cycles, and different needs. Mainly based on your goals and your level of experience, you could find the best LGD 4033 dosage.
But before I’m going to share more information about the best LGD4033 dosage, you should first know what this SARM actually is.
LGD 4033 (Ligandrol) Profile
LGD 4033, popular as Ligandrol and also known as Anabolicum or VK5211, is a SARM (Selective Androgen Receptor Modulator) that was discovered and developed by Ligand Pharmaceuticals. That’s why it got this name in the first place. This is a company from San Diego, California, USA.
LGD 4033 is a SARM that is still under research. However, this compound is already popular among bodybuilders, athletes and whoever else thinks about boosting their physique and performance. Researchers currently study LGD4033 SARM for treating various health diseases such as muscle wasting, osteoporosis, and others.
Because of this, lots of people started to use Ligandrol for their fitness goals. There are already a lot of anecdotal reports from such people indicating the benefits and the side effects they experienced by running an LGD 4033 cycle. 
LGD 4033 – Ligandrol Half Life
It’s extremely important to learn about the half-life of any compound that you’re about to run. That’s because the half-life of a product indicates the time that half of this product requires to flush out of the body.
This means that the time of half-life is the time in which the compound is only half as concentrated as it used to be when it was initially administered. Taking this into consideration it’s obvious that after twice the time of half life, you wouldn’t be left with any of that product in your bloodstream.
According to the research on Ligandrol, the half-life of LGD4033 is anywhere between 24 to 36 hours.
This is the reason why a single administration per day of LGD 4033 dosage would be enough. Considering its relatively long half-life, the concentration of this SARM in your bloodstream won’t fluctuate if you would have a daily dosage of Ligandrol in a single session.
LGD 4033 (Ligandrol) Dosage
Considering that LGD 4033 has not yet reached human trials, there is no official data for LGD 4033 dosage. Nonetheless, according to the studies done on animals and by converting the dosage that an average human would need based on weight, the dosage usually starts at 5 mg per day.
According to bodybuilders and athletes who already experimented with this SARM, you could also start at 10 mg a day without great risks of side effects. Nonetheless, I wouldn’t recommend starting with a higher dosage. That’s because while a higher dosage can be more effective and gain muscle and strength, a higher dosage also means a greater risk of side effects. That’s why I always recommend starting with a low dose.
Although the most common SARM cycle length is 8 weeks, I would rather recommend starting with a shorter cycle of 6 weeks too. Shorter cycles (and lower dosage) mean less testosterone suppression. Considering that we’re talking about the first Ligandrol cycle, less suppression is always a good idea as you never know how your body would react to this specific SARM’s suppression (and other possible side effects).
In short, a dosage of 5-10 mg per day for a period of 6 weeks would be enough to enhance the effectiveness of this product, however, it would help you avoid the nasty side effects. Even if you experience any, you’ll get minimal side effects.
Women’s Dosage…
That’s when talking about cycles for men. Women, however, should not use SARMs for longer than 6 weeks and in dosage no higher than 5 mg a day. Only if you’re a woman with a lot of experience with LGD 4033 you may attempt the 10 mg/day dosage but that’s a huge dosage. Women better start with 2.5 mg a day. In fact, men that are underweight and want to attempt using LGD4033 should start at 2.5 mg per day too.
Increasing Dosage…
In the best scenario, users should only increase their intake of the LGD 4033 after every cycle. Do note that if you do increase the dosage, you should do it gradually at a slow rate. This means that it’s a really bad idea to attempt an increase from 5 mg up to 20 mg instantly. While there are athletes who use as much as 20 mg per day, it requires experience to attempt such a high Ligandrol dosage. Most people suggest that they do not need a higher dosage than 15 mg a day.
LGD 4033 Dosage For Cutting
Ligandrol dosage for cutting is usually lower than that for bulking. That’s because while you’re cutting you only attempt to maintain lean muscle tissues and burn fat. You need a lower dosage as it would be enough to keep your muscles. When you’re bulking, however, you need a higher dosage as you attempt to grow muscles.
Nonetheless, I have to warn you that it’s rare when people to use Ligandrol for cutting. They usually use it for bulking. Nonetheless, if you want to try it out for cutting, you can still go for it.
So, when it comes to cutting, the LGD4033 dosage is usually around 5 mg a day and rarely more. Usually, people stack it with other SARMs such as Ostarine (MK2866) and/or Stenabolic (SR9011) or Cardarine (GW501516).
LGD 4033 Dosage For Bulking
As said, LGD 4033 is a SARM that most people use for bulking cycles. That’s when they try to gain as much muscle as possible. That’s why people tend to use higher dosages in an attempt to gain more muscle and more strength.
Yet, as I said, the higher the dosage, the higher the chance of side effects. If you never used any other SARMs, I wouldn’t recommend a stack. But if you already tried LGD4033 previously, you can attempt a higher dosage and/or stack it with other SARMs.
Usually, it involves bulking SARMs such as RAD140 (Testolone), S23, or YK11.
BUY LGD4033 (LIGANDROL) FOR SALE HERE
No PCT Ligandrol Dosage
It’s very important to understand that Ligandrol (LGD4033) is a powerful SARM. For this reason, LGD4033 is likely to cause testosterone suppression. Therefore, you’re going to need a PCT after the cycle. There are numerous posts where I stated why it’s so important to have a PCT after a SARMs cycle. A short answer would be: PCT helps you stay healthy and maintain your gains. Without a PCT, you are likely to recover much slower after a cycle, lose gains, and feel really low.
A Post Cycle Therapy usually goes with Clomid (clomiphene) and/or Nolvadex (tamoxifen). Nonetheless, if you use a very low dosage of LGD4033 in combination with compounds that are non suppressive, there’s a chance that you won’t need a PCT plan. It also depends on your genetics and lifestyle (environment, such as diet, workout routine, and other factors).
But some people attempt using Ligandrol dosage without a PCT and they have success. But as said, to do so, it’s important to keep dosage low, cycle short and not to stack it with other suppressive to your natural testosterone compounds. Otherwise – you are very likely to need a PCT. Check below Ligandrol dosage and stacks for different goals:
Body Recomposition
This cycle is going to help you achieve a body recomposition by using LGD 4033 in combination with Stenabolic. In this cycle, a low LGD 4033 dosage will help you build muscle while Stenabolic (SR9001) is going to help you burn off fat. You’re still likely to need a PCT, but there’s also a chance that you wouldn’t.
You may attempt it. The cycle length is 6 or a maximum of 8 weeks long. LGD4033 dosage shouldn’t go over 5 mg a day. Stenabolic is not suppressive so it doesn’t require a PCT regardless of dosage. You may attempt 30 mg per day.
With a proper diet and workout plan and if you get high quality compounds – you are likely to lose inches of fat and add a good amount of muscle. Overall your body weight might not change substantially (if at all), but you are going to look completely different.
Bulking Cycle
You may attempt a bulking cycle with LGD4033 without a PCT afterward. But then again, you wouldn’t be able to increase the dosage over 5 mg/day and a cycle length of 8 weeks. Even this is likely to be enough to suppress you enough to make you require a PCT. You may attempt it nevertheless.
For this, you are going to need to add MK 677 (Ibutamoren). This is a compound that doesn’t suppress your natural testosterone production and might even help boost its production after you stop using LGD4033. It’s an HGH secretagogue. The dosage is 15 mg per day. Start with both these compounds, but you stop at 8 weeks with LGD 4033, yet continue with Ibutamoren for 4-6 more weeks.
Cutting Dosage
A cutting cycle is going to help you to maintain lean muscle but burn off fat. Your main goal is to shed as much fat as possible. Usually, you only use 2.5 mg a day of Ligandrol alongside Stenabolic and/or Cardarine. 30 mg/day of Stenabolic and/or 20 mg/day of Cardarine. This is another product that is not going to suppress natural testosterone levels.
Yet, some people replace LGD4033 with 10-15 mg a day of Ostarine (MK2866) because it’s milder and may cause less suppression, but is still good enough at maintaining lean muscle mass.
Conclusion
- In the end, it’s important to understand that there are different dosages of LGD 4033. It usually ranges from 2.5 mg a day up to a maximum of 20 mg a day. The most common dosage ranges between 5 mg and 15 mg per day.
As you can see, there is a very big difference in Ligandrol dosage. That’s because they are suitable for different people and for different cycles. For example, the more muscle you want to build, the higher the dosage goes. But you can’t increase it too much because of the risk of side effects. Moreover, usually, people who have more weight can attempt higher doses than those who are skinnier. Because of this and because LGD4033 affects men differently than it affects women, men can consume more LGD 4033 than women can. Lastly – it also very much depends on the level of experience.
You can stack LGD 4033 with other compounds, but then again, it depends on your level of experience and goals. Moreover, you’re likely to need a PCT plan because of the suppression.
One last thing to mention – you need to make sure you buy quality Ligandrol. Unfortunately, there are scammers who offer low quality and/or underdosed LGD 4033 and/or mixed or replaced altogether with other substances. This is likely to make LGD 4033 either ineffective or even dangerous (as long as it’s not real LGD4033 at all or is mixed with dangerous substances).
What I’m trying to say is that you should make sure you buy only quality Ligandrol. Low quality products are likely to cause side effects. Buy quality SARMs only at SARMS.to to ensure the highest quality of products for the lowest price on the market!
